For years there seemed to be a particular reputable way for you to store info on your computer – having a hard drive (HDD). Nonetheless, this type of technology is presently displaying its age – hard disks are loud and sluggish; they’re power–hungry and tend to create quite a lot of warmth in the course of intense procedures.

SSD drives, however, are quick, take in a lot less energy and are generally much cooler. They furnish an exciting new strategy to file accessibility and storage and are years ahead of HDDs with regard to file read/write speed, I/O efficiency and power efficacy. See how HDDs stand up against the more recent SSD drives.

1. Access Time

Image

SSD drives offer a brand new & impressive way of data safe–keeping based on the utilization of electronic interfaces as an alternative to any moving components and revolving disks. This brand new technology is considerably quicker, enabling a 0.1 millisecond data access time.

Image

The concept powering HDD drives times back to 1954. And although it has been significantly processed progressively, it’s still no match for the imaginative concept behind SSD drives. Using today’s HDD drives, the best data access speed it is possible to attain may differ in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the completely new radical data storage approach adopted by SSDs, they give you a lot quicker file access speeds and quicker random I/O performance.

All through WebTraKtor’s lab tests, all SSDs confirmed their capability to handle no less than 6000 IO’s per second.

Image

Hard drives present reduced data file access speeds due to the aging file storage and accessibility concept they are employing. Additionally they show substantially slower random I/O performance matched against SSD drives.

During WebTraKtor’s tests, HDD drives managed on average 400 IO operations per second.

3. Reliability

Image

The absence of moving elements and rotating disks within SSD drives, and the recent developments in electrical interface technology have ended in a substantially less risky data file storage device, having a common failure rate of 0.5%.

Image

HDD drives utilize spinning disks for storing and reading data – a technology dating back to the 1950s. And with hard disks magnetically suspended in the air, rotating at 7200 rpm, the possibilities of anything failing are considerably bigger.

The average rate of failure of HDD drives ranges between 2% and 5%.

4. Energy Conservation

Image

SSD drives function almost noiselessly; they don’t produce surplus warmth; they don’t demand additional air conditioning solutions and also take in less electricity.

Tests have indicated that the typical electricity use of an SSD drive is amongst 2 and 5 watts.

Image

HDD drives can be known for getting loud; they can be at risk of getting too hot and in case there are several hard drives within a server, you need a different air conditioning unit exclusively for them.

All together, HDDs use up somewhere between 6 and 15 watts.

5. CPU Power

Image

The swifter the file accessibility rate is, the sooner the data demands will likely be processed. Therefore the CPU do not need to arrange allocations looking forward to the SSD to reply back.

The common I/O delay for SSD drives is barely 1%.

Image

Compared to SSDs, HDDs enable not so quick file accessibility rates. The CPU will have to await the HDD to send back the inquired data file, reserving its assets meanwhile.

The standard I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

Image

The vast majority of WebTraKtor’s brand new servers are now using simply SSD drives. Each of our lab tests have indicated that having an SSD, the average service time for an I/O request whilst running a backup remains under 20 ms.

Image

During the same lab tests with the same server, now installed out with HDDs, effectiveness was noticeably reduced. All through the web server backup process, the regular service time for I/O calls varied somewhere between 400 and 500 ms.

7. Backup Rates

Image

Speaking about back ups and SSDs – we’ve observed a fantastic progress in the back–up speed as we moved to SSDs. Today, a usual server data backup can take just 6 hours.

Image

Over the years, we have used predominantly HDD drives on our web servers and we are knowledgeable of their functionality. On a web server equipped with HDD drives, an entire server backup typically takes around 20 to 24 hours.

With WebTraKtor, you can get SSD–operated hosting services at cheap prices. Our shared plans feature SSD drives by default. Apply for an account along with us and experience how your web sites can become much better without delay.


  • Service guarantees

  •  
  • Each of our Virtual Private Servers is setup for you 100% free. 99.9% network uptime. Full root/administrator access.
  • Compare our prices

  •  
  • Effortlessly review the parameters and tools offered by our Virtual Private Servers. Find out which VPS setup provides you with everything that you’ll need to deal with your multi–media web presence with no hassle.
  • Compare our hosting plans
  • Contact Us

  •  
  • We’re on duty for you around the clock to answer all questions concerning our VPS services. 1–hour reply time frame warranty.